KIT EASY-FIT is made by Isobus Green, an innovative concept presented at EIMA 2021 and developed by COBO.

Its performance:

• connect the tool and monitor its performance on the virtual touch screen terminal;
• recognise the tool, set the optimal mode for work tasks;
• operators, during their activity, will be able to control, through an intuitive graphic display, parameters such as PTO speed, engine speed and instant fuel consumption.

In this way it will be possible to improve the efficiency even of very simple or dated tools and vehicles.

Alongside the working speed, the operator can be sure that his activities will proceed according to the best recommended settings through the display of a clear, visible green graphic indicator on the terminal.

Today’s farmers rely exclusively on the operator’s sensitivity and experience. Unfortunately, in all agriculture sectors, skilled workers are becoming harder to find. The KIT EASY-FIT tool is therefore the best option to support and enhance the farmers activities.

With our COBO ISOBUS technology, equipped with tailor made information displays, we can help less experienced operators to get better results for effective processing, at the lowest cost and environmental impact.

COBO has expanded its research on the efficiency of agricultural activities and on safety protocols, always looking to the future for continuous improvement and above all to the needs of the company and the worker.

KIT AGRI 4.0 is the result. Installed on board, it is compliant with 4.0 certification:

• the agricultural entrepreneur will be able to have his company continuously under control;
• the system makes it possible to automatically recognize which and to what extent tools are used in the various processes, day by day;
• The farmer will be able to have complete traceability of resources and the correct allocation of costs.

It will therefore be easier and more immediate to measure the profitability of your land, your resources, to estimate the importance of your customers, the yield of used resources and the investments made or to be planned.

All collected data can be viewed by the user via the web interface and made conveniently available wherever you are: sitting at your desk, from your tablet or even from home. The system is able to send all the information of field work activities in encrypted form, directly to the COBO INTOUCH AGRI cloud, via the UMTS data communication channel.

The COBO INTOUCH AGRI portal allows you to monitor your vehicles employed in the work in progress at any time, their position on the map, the dashboard in real time and for each vehicle it is possible to recognize the operator and the connected implement.

In a few seconds, for each work area it is possible to carry out an analysis of resources and costs, which tractors and implements were used, by which operators, for how many hours, with fuel consumption data.

Source: COBO Group

The post Cobo Group Presents Easy-Fit Technology Kit to Cope with Efficiency Problems appeared first on North America FarmQuip Magazine.

Operators looking to perform a wide range of job site tasks will find unbeatable versatility, performance, and productivity with Bobcat’s all-new UW53 and UW56 Toolcat utility work machines. These two refreshed models of Bobcat’s Toolcat utility work machine lineup come equipped with a variety of enhancements – both inside and outside the cab – for superior operation. Replacing the previous models of the Toolcat utility work machine lineup, the UW53 and UW56 have the capability for incredible attachment versatility, allowing operators to easily turn their equipment into multi-purpose hauling, lifting, mowing, towing, and loading machines.

These new models have totally redesigned LED lighting, providing increased light dispersion and intensity using less power. The embedded road lights are integrated within the front fenders (instead of on the bottom of the front windshield), providing optimal protection and unobstructed illumination for better visibility in all directions. The rear work lights have also changed to LED, to optimize for better light dispersion.

The newly updated dual-drive response system has been enhanced to provide smoother acceleration and deceleration, automatically recalling drive response settings. The first set provides smooth, responsive traction for driving between tasks, and the second set changes the drive system to a more aggressive response when operating in a low range to maintain hydraulic and traction power for uninterrupted work.

A new optional rear-view camera gives operators ideal visibility for tasks that require regular machine maneuvering. The rear-frame location of the camera provides an unobstructed view for connecting a ball hitch (UW56 model only).

In addition to these performance enhancements, operators will find several significant comfort updates, including a totally redesigned interior with an integrated 5-inch display, exceptional ergonomics, component placements, and storage spots all within easy access. All controls are in one place for increased operational control, including all secondary functions.

For unbeatable uptime and serviceability, operators will find a larger fuel filter, increased operating time between required oil filter changes, increased corrosion protection and fender shape/material, larger in-cab access points, and improved wiring harness.

The post Bobcat Company Launches Two Reimagined Toolcat Utility Work Machines appeared first on North America FarmQuip Magazine.

Junttan USA General Manager Miika Eskelinen says,

“Junttan and XCMG will work closely to help strengthen both of our product lines in the future. Both companies share the same values of quality, trust, and partnership with our valued customers. It is with great pride that we see our U.S.-based company strengthening its products.”

Not only is XCMG one of the largest construction equipment manufacturers in the world, but it also has 20 years of experience manufacturing foundation equipment. This new partnership will expand Junttan’s product line from primarily piledriving equipment into foundation drilling equipment.

Junttan USA’s Vice President Sales & Operations Tim Dutton, who has previous experience with foundation drilling equipment, will be instrumental in guiding this expansion. He says,

“This partnership will allow Junttan to expand its already extensive line of piling rigs and bring new options to our customer base. We are proud to be partnered with an organization like XCMG.”

Junttan recognized an increase in drilled shafts in the North American foundation market and wanted to expand beyond its traditional line of piling rigs and hammers to meet the changing needs of its contractor customers. The new line of XCMG drilling rigs allows the company to provide equipment and tooling for both driven and drilled pile foundations. These rigs are designed for Kelly drilling, continuous flight auger (CFA), full displacement piles (FDP), single-column mixing (SCM), cased CFA (CCFA), and low headroom applications. Junttan USA also expects to eventually expand its technology to perform cutter soil mixing for diaphragm wall applications.

The XCMG line of drilling rigs has a large range of operating weights from 45 to 200 tons and torque values between 130 and 800 kNm. All are outfitted with Cummins engines and will be Tier 4 or greater to comply with emission standards in the U.S. Junttan USA has access to the Cummins InSite software for troubleshooting and diagnostics. This allows all engine service to be performed by Junttan technicians with no outside support from a Cummins dealer. All new products will be backed by a one-year/2,000-hour warranty and handled directly through Junttan USA.

Junttan USA will provide service, and stock a comprehensive inventory of parts for the XCMG product line at its Delaware and Florida locations. XCMG has also committed to stocking parts at its locations in Nevada, Texas, and Minnesota.

“The signing of this agreement between XCMG and Junttan USA is a mutual relationship that is built on respect and communication. We see a great opportunity to provide drilling equipment in the United States and are very happy with our new partner Junttan USA,”

says Kong Qinghua, president of XCMG Foundation Construction Machinery.

The post Junttan Brings New Line of XCMG Rotary Drilling Rigs to U.S. appeared first on North America FarmQuip Magazine.

Sustainable and efficient

There are good reasons to promote the establishment of additional crops or to apply extra nutrients whilst seeding. An additional crop will suppress weed growth but not compete with the leading crop. The extra crop catches the mineral nitrogen in the soil, as well as air nitrogen when mixing with leguminous plants, transforming it into organic nitrogen. Thus, nitrogen will still be available for the next crops. Fertilizers are applied with precision to support plant growth, specifically during youth development avoiding its wash-out into groundwater

All this will be a major contribution to sustainable farming by encouraging root development, reducing the risk of erosion, and increasing biodiversity and humus content. Sustainability will protect farmers’ most valuable asset: the soil. Utmost efficiency and cost-saving are achieved by the combined application of various types of seeds and/or fertilizer all in one pass.

Wide scope of application

There is a wide scope of application and numerous possible variations for this integrated seed drill:

Already the e-drill maxi plus, as the combined grain and fertilizer model of the power harrow mounted seed drill, is equipped with a divided hopper with an adjustable ratio of 60:40, 70:30, or 100:0 and two independently working metering devices.

By integrating the a-drill, an additional extra seeder comes into play and offers a multiple choice of combinations: Two types of material are precisely deposited by the CX-II double-entry colter (2 distribution heads) on the e-drill maxi plus; whereas the third type of material is applied via the baffle plate from the integrated a-drill into the soil flow of the following harrow:

1. 3 types of material in one pass: 1 type of seed (e.g. wheat/barley) plus fertilizer in the sowing rows plus slug pellets via the following harrow
2. 3 types of material in one pass: 1 type of seed (e.g. wheat/barley) plus fertilizer in the sowing row plus 1 type of seed (e.g. clover) via the following harrow
3. 3 types of material in one pass: 2 types of seed in different sowing rows (e.g. beans & rapeseed) plus slug pellets via the following harrow
4. 3 types of material in one pass: 2 types of seed in the sowing row (e.g. beans & rye) plus 1 sort of seed (e.g. clover) via the following harrow

Flexible adjustments

The a-drill has 8 outputs which will spread the flow of seeds or fertilizer by the baffle plate uniformly into the soil flow of the following harrow over the entire working width.

The a-drill is delivered with different types of rotors: for small seeds (rape, mustard, cabbage, clover, etc.), medium rotors for seeds like vetch, grass, or sunflowers, and for large seeds (peas, horse beans, etc.) or fertilizer. The agitator placed above the rotor ensures a steady stream of seeds. A brush, located at the base of the rotor, will regulate the flow and improve the setting accuracy. Up to 8 different rotors are available for fine, medium, and large-sized seeds.

Source: Kverneland

The post Kverneland Integrates E-Drill Maxi Plus with Integrated A-Drill appeared first on North America FarmQuip Magazine.

Available for fall 2022, the VT-Flex 435 vertical tillage tool from Case IH offers simple, variable gang angle adjustments, allowing producers to meet the soil management needs of any field with greater flexibility and precision. With adjustments that can be performed on the go and a rugged, durable design built to withstand tough conditions, this vertical tillage tool is ideal for mixed farms and small to midsize grain operations. The VT-Flex 435 is available in widths 11 to 25 feet.

“This addition to the Case IH lineup is designed with the agronomic features needed to match a wide variety of soil management requirements. Whether a producer is looking to size residue and preserve soils — or mix even the most stubborn crop residue — effective field preparation is made simple with fast, easy gang angle adjustments,”

said Chris Lursen, Case IH tillage marketing manager.

Flexible and agronomic soil management

Agronomic flexibility is a core design feature of the VT-Flex 435 vertical tillage tool, which helps producers achieve optimal field conditions with simple, variable gang angle adjustments. Gang angles are mechanically or hydraulically adjustable from zero to 12 degrees to match the operator’s desired field finish — spring or fall. From the tractor cab, operators can adjust the front gangs independently from the rear gangs to further vary residue coverage and field finish. Additionally, 20-inch, shallow-concavity fluted blades help cut residue at shallow gang angles, cutting and mixing residue with soil for faster breakdown.

Lursen said:

“We’re hearing that producers are looking to vary their residue coverage between seasons or accommodate conservation tillage practices. The VT-Flex 435 vertical tillage tool allows just that. One-degree gang angles allow for efficient slicing of residue, while more aggressive angles up to 12 degrees allow for variable levels of residue mixing.”

The VT-Flex 435 vertical tillage tool is equipped with a TigerPaw Crumbler that is designed to produce uniform clod sizing and residue distribution for an optimal field finish. A standard walking tandem design on the mainframe and wings provides balance and stability, reducing soil compaction while providing optimal depth control.

On-the-go adjustments offer greater productivity

Making the most of time spent in the field is an important consideration for producers — which is why the VT-Flex 435 vertical tillage tool is designed to maximize in-field productivity. With optional hydraulic gang angle adjustments (available on 15- to 25-foot models), operators can seamlessly adjust tillage tool settings from the cab while continuing to cover acres at speeds of 6 to 9 mph.

With 1- to 4-inch depth capabilities, the VT-Flex 435 vertical tillage tool offers single-point hydraulic depth control for quick and easy adjustments in a variety of field conditions. A front T-hitch design allows for tight, efficient turning when space is at a premium. Transport widths of 13 feet 7 inches enable operators to get from field to field faster and with ease.

“We know producers need to make frequent adjustments to meet changing field conditions, and making those adjustments on the go is just one way this new Case IH tillage tool helps operators optimize their time,”

Lursen said.

A durable design built to withstand tough field conditions

The VT-Flex 435 vertical tillage tool is built tough to work hard season after season. The machine is equipped with 20-inch Earth Metal VT wave blades designed to stand up to tough conditions with maximum durability, while flat, crimped blade centers create exceptional blade strength.

Case IH has incorporated a number of durability features on the VT-Flex 435 vertical tillage tool that are common and proven on other Case IH vertical tillage tools. Rugged cast-iron nodular spools and large arbor bolts make for greater durability, and the TigerPaw Crumbler roller features a proven spring down pressure design with formed bars to add strength under any conditions. Additionally, a powder coat paint finish provides greater resistance to impact, scratching, fading, and in-field wear and tear.

“Producers can rest easy knowing that everything from the blades to the bolts has been designed to withstand the toughest conditions and deliver the best return on investment,”

Lursen said.

The post New Case IH VT-Flex 435 Vertical Tillage Tool Offers Soil Management Flexibility appeared first on North America FarmQuip Magazine.

CNH Industrial Reman recently added a 3D printer to its manufacturing facility. With the technology growing at an incredible rate, the new 3D printer offers CNH Reman the capability to produce a vast array of complex and custom components, fixtures, and tools.

As CNH Reman continues to develop its 3D printer capabilities and testing, the company anticipates expansion to the production of component parts that will be assembled into high-quality, finished products for its customers.

“These components typically come at a high cost due to minimum buy quantity restrictions or vendor upcharge for a small batch. The 3D printer will allow us to produce lower volume components in our facility at a reduced cost. The design flexibility will also allow our engineering team to make modifications to these components to improve performance and quality. In turn, producing a better product at a lower cost of ownership,”

said Jeremy Kelley, product engineering manager at CNH Industrial Reman.

In addition, each component, fixture, or tool can also be produced almost immediately within the CNH Reman facility, which reduces cost and long lead times.

CNH Reman is currently working through the setup process and producing prototypes with the 3D printer. To date, CNH Reman successfully produced tooling and fixtures to aid with production and component measurement processes. As the technology continues to advance, CNH Reman believes 3D printers will offer multiple opportunities for advancement in reman products.

“The possibilities of 3D printing are nearly limitless. The expansion of material types and size envelope can offer an endless opportunity in reman product life. This will help to keep our customers’ machines running throughout their lifespan,”

said Kelley.

The post CNH Industrial Reman Adds 3D Printer to Expand Component Part and Tooling Production Capabilities appeared first on North America FarmQuip Magazine.

The Raptor strip-till tool features TerrainPro row-units with independent depth control to optimally follow soil terrain for creating the ideal seedbed in six stages:

The leading swivel coulter with a 20” blade features 1,500 lbs. of down pressure to cut through the heaviest residue.

The free-floating row cleaners with curved finger design help clear residue from the strip.

The centrally mounted crowfoot-style wheel maintains row unit depth independently from row to row.

The tillage shank precisely tills the soil from 6” to 12” deep to manage the root zone hardpan. Shanks feature 2-1/4” cast points and integrated 1-1/2” wear bars for long-term, trouble-free use.  Model 2030 features spring-cushioned auto-reset shanks with 2,000 lbs. of point-load pressure and Model 2015 offers shear-bolt protected shanks with 5,000 lbs. of sheer pressure.

To create the seedbed, 18” notched concave closing coulters are mounted on each side of the shank to keep the soil in the strip. They feature tool-free down pressure, width, and angle adjustability to fine-tune the seedbed finish.

Standard trailing crowfoot-style conditioning wheels break up clods, condition the strip and the unique self-cleaning design prevents plugging with rocks, mud or other debris. Other conditioning options include 15” Rolling Harrow baskets for additional tillage or 15” rubber press wheels for added soil firming.

Raptor strip-till tools are available in pull-type 12 or 16-row models with 30” spacings or 3-pt. mounted units in 6- 8- and 12-row models with 30”, 36” or 38” row spacings.  Pull-type models are constructed with a heavy-duty 7” x 7” toolbar for reliability and feature a narrow folded width of 13’6” for easier transport and storage. The toolbar features 15 degrees of upward and 5 degrees of downward flex to follow uneven terrain. Mounted 3-pt. MT models are manufactured with heavy-duty double-wall steel with a 6” x 6” rear mounting bar for long-term operation.  A flex-frame is available as an option for 12-row 3-pt. MT models.

Pull-Type models can be equipped with liquid or dry fertilizer distribution systems for the ultimate one-pass tillage solution. LT models feature a 1200-gallon liquid tank with a 50-gallon sump for keeping the pump primed on sidehills. DT models feature dual, 6-ton dry fertilizer tanks for single or dual material distribution.

The rearward positioning of the tanks allows enhanced visibility of the TerrainPro row units from the tractor cab. Both feature ISOBUS rate control that provides easy operation from the tractor’s virtual terminal and can be used with section control to automatically apply pre-loaded field fertilizer prescriptions. Mounted 3-pt. units can also be equipped with optional liquid or dry fertilizer shank attachments with a rear hitch for pulling a fertilizer caddy.

The post Unverferth Presents the New Raptor Strip-Till Tool appeared first on North America FarmQuip Magazine.

During the seeding operation, the RelativeFlow Blockage detection system helps farmers make sure product is being accurately and uniformly distributed. If blockages or reductions occur, the system alerts the operator of the issue – saving operators time by eliminating the need for them to leave the tractor to check for blockages. Using RelativeFlow Blockage detection, farmers also can avoid the need to reseed areas that were skipped in the field caused by blockages of seed and fertilizer.

Another MY22 update for all John Deere air seeding tools is the addition of TruSet In-Cab Downforce adjustment that eliminates the need for the farmer to stop and make manual downforce adjustments. Settings can be viewed and adjusted from the John Deere Generation 4 Display. TruSet In-Cab Downforce adjustment also improves seed-to-soil contact, plant emergence, and maturity, and helps operators maximize uptime in the field compared to manually adjusting downforce at the tool.

For MY22 John Deere is offering an enhancement to its popular ProSeries Opener with the addition of new Quick-Change Blades that can save farmers time and reduce labor costs associated with blade changings before, during, or after seeding season. Quick-Change Blades reduce the time it takes to change opener blades by up to 45% compared to current ProSeries opener blades.

The post John Deere Updates Air Seeding Tools for MY22 appeared first on North America FarmQuip Magazine.

Developed three years ago by Naïo Technologies, a pioneering company in agricultural robotics, Ted is the first autonomous, 100% electric high-clearance tool dedicated to the mechanical weeding of vines. The robot has quickly generated strong interest in the wine-growing sector, which is looking very closely at this solution.

More than twenty Teds are now working in various vineyards. This high-clearance tool, capable of working autonomously among the vines, responds to the sector’s current needs. Ted limits soil compaction and thanks to its mechanical weeding will allow the elimination of allow chemical weedkillers, while still remaining environmentally-friendly thanks to its entirely electric operation.

The robot is therefore continuing to improve in the hands of its wine-growing experts in terms of reliability, autonomy and safety.

“The Bernard Magrez Estate is convinced that robotisation will play a fundamental role in the mechanical maintenance of the land over the next few decades. Electrical power, the absence of greenhouse gas emissions and noise pollution are the main focus of our commitment to the environment. In this, we have developed a 4-year partnership with Naïo Technologies to perfect a robot capable of carrying out the majority of the soil maintenance work among the vines”

highlights Arnaud Delaherche, R&D Manager of the Bernard Magrez Estate.

This confidence is reinforced by a common desire to promote an innovative, technological solution already in existence and to prepare it for tomorrow: the Ted robot.

“Within the context of its commitments on sustainable wine growing and to support its partner wine producers, the Hennessy company is testing many different solutions in its vineyards to promote more virtuous wine growing. The R&D partnership project with Naïo Technologies is fully compatible with this approach. The development of the Ted robot is therefore an innovative alternative to the use of weedkillers. Its light weight and adaptability, as well as its electrical operation, are assets in view of the development of sustainable wine growing in the Charente region,”

specifies Mathilde Boisseau, Hennessy Vine and Wine Manager.

From July onwards, they will be the first ones to test the new version of the Ted robot before its official launch planned for September.

Source: Naïo Technologies

The post Experts in the Wine-Growing Sector Take a New Step Forward with Naïo Technologies appeared first on North America FarmQuip Magazine.

The post Vicon presents new swath belt appeared first on North America FarmQuip Magazine.