Precision Lift & Load takes front loader work to a new level and further strengthens Valtra’s position as the ideal front loader tractor and developer of easy-to-use technology solutions. The new app enables the tractor operator to use and measure loading tasks in a completely new way.

The precision of work is significantly enhanced by the loader scale function, which weighs loads of different materials, such as the weight of hay bales when feeding livestock. The app collects weighing data, and once the task has been completed, the operator can transfer the data to an Excel spreadsheet for invoicing purposes.

The app also enhances work productivity and safety, as the upper and lower limits for loader movements and the maximum angles can be set, stopping the loader automatically when the limits are reached. There is also an easy-to-use shake function that helps the operator ensure that no materials remain in the bucket such as wet snow or sand.

These new features make front loader work even easier, more efficient, more comfortable, and, most importantly, safer.

The app is operated from the touchscreen on the award-winning SmartTouch armrest and does not require any separate controls or displays. Adjusting the settings of the Precision Lift & Load app is easier than using a smartphone, so the operator can relax and enjoy the work while the tractor automatically takes care of all the front loader settings.

Precision Lift & Load functions for different front loader tasks can be saved as profiles in the SmartTouch interface. Before performing the same task again, the operator simply has to select the most suitable setting from the profiles.

Valtra’s smart front loader uses the same hardware as its other front loaders. The stylish and high-quality design also protects the smart components. Two pressure sensors and two position sensors plus an ECU controller are located inside the beam. The key role is played by the SmartTouch software, which combines the data collected from the sensors and communicates the operator’s wishes to the front loader.

Factory-fitted front loaders have for years offered Valtra customers high-performance loaders that are easy to operate and suitable for a wide range of tasks, including the most demanding in terms of hydraulic power. The small turning radius of Valtra tractors also makes the front loader work more efficient than with any other tractor.

A large panoramic roof provides excellent visibility when the loader is raised. In addition, the operator does not need to lean forwards to see the load. The low engine cover also provides a clear view of the front. The exhaust pillar and air intakes are positioned in such a way that they do not impair visibility when driving or working.

G, N, and T Series models are also available with a third function that enables bale grapples, for example, to be used at the same time and with the same joystick as other front loader functions. This also enables precise and continuous movements instead of just on or off functions. The hydraulically tiltable tool carrier, X-Tilt, is available as an option from Valtra Unlimited, making front loading work even more precise.

The Precision Lift & Load app will be available starting this autumn as a factory-fitted option on G, N, and T Series tractors with the award-winning SmartTouch armrest. The system will also be available later as a retrofit package for 5th generation SmartTouch tractors.

Source: Valtra

The post Valtra Presents the New Smart Front Loader appeared first on North America FarmQuip Magazine.

JCB expands its E-TECH range of zero-emissions machines with the launch of its first-ever electric Loadall telescopic handler model.

JCB has taken a pioneering lead in the move to electric propulsion in construction, agricultural and industrial machinery, having successfully introduced the 19C-1E mini excavator and the 66-40E Teletruk to the market. As world market leader for telescopic handlers, the launch of the JCB 505-20E Loadall takes equipment electrification further into general construction, industrial and agricultural markets, offering a zero-emissions material handling solution with no compromise in performance or productivity. We are very excited about the prospects for this machine.

Tim Burnhope, JCB Chief Innovation Officer

Key features of the new Loadall include:

• Dual electric motors for drive and lift deliver increased efficiency
• Brake regeneration boosts battery charge
• Regenerative hydraulics increase efficiency
• Full shift operation capability
• Range of charging options, including on-board and off-board rapid charging

The 505-20E uses two proven electric motors, one for the driveline and the second to power the hydraulic system. The 23 hp (17kW) traction motor drives through a permanent four-wheel drive dropbox, to JCB drive/steer axles. The 30hp (22kW) hydraulic system motor powers a fixed displacement gear pump, delivering a maximum of 21 gal/min (80 l/min) of flow.

Flow is proportional to joystick position and the lift end is controlled by an electro-hydraulic valve block, with hydraulic regeneration on boom function.

Extensive analysis of customer duty cycles, through JCB’s LiveLink telematics system and on-site studies, tests, and evaluation, has allowed JCB engineers to optimize the machine’s battery life to meet customer requirements. The 96V Lithium-ion battery is capable of providing full-shift operation.

The traction drive motor utilizes regenerative braking, instead of a traditional braking system, topping up the battery in the process. The hydraulic system also regenerates flow while lowering the boom, reducing the power requirement, and extending operating hours. The brake regen function automatically turns off when the battery is fully charged.

The machine has a 240V, 16A onboard charger capable of recharging the battery in 8-10 hours. An optional JCB Universal Charger can be used for a rapid top-up during breaks, in as little as 60 minutes.

The 505-20E has been designed to meet the current and future needs of customers in a variety of industry sectors, providing zero-emissions operation for working inside buildings including barns, in underground construction, vegetable and fruit storage centers, greenhouses, on environmentally friendly sites, around hazardous materials, and in urban areas with stringent emissions regulations.

In addition, the new telehandler can draw on low-cost renewable energy on farms and other rural enterprises that generate their own ‘green’ electricity.

A secondary benefit of electric operation is a significant reduction in noise levels, making the Loadall suitable for extended operation in noise restricted areas such as schools, inner-city work, around animals, and hospitals. The 505-20E delivers an in-cab noise level of just 66.7dB, while the external level is 92.2dB. A white noise reversing alarm is available as an option, to warn site workers of machine movement.

JCB has not compromised on operator comfort. The full-size ROPS/FOPS cab is ergonomically designed for fatigue-free operation, with easily located controls. The machine will be offered as a cab or canopy.

Maximum lift capacity is unchanged from the diesel model as the 505-20E has the same 5500 lbs (2500 kg) capability. External dimensions also remain the same with 12 ft 1in (3.7m) outside turn radius and overall height of 6 ft 2 in (1.89m). The machine has been designed to deliver similar cycle times as the diesel telescopic, with no loss of performance. It can be used with forks, a range of buckets, and many other JCB Loadall attachments.

Source: JCB

The post The JCB Loadall Telehandler goes all Electric appeared first on North America FarmQuip Magazine.