1. The ability to swap out tooling quickly with two knock-out dowel pins
2. The capability of reaming directly from the transmitter housing
3. The elimination of starter rods and adapters in certain applications

Since the Vermeer Ultra X3 uses a robust spline connection system, tooling doesn’t have to be threaded on, eliminating the need for breakout tongs to make and break torqued tooling connections. Operators just need to align the spline on the tooling with the spline on the housing, then secure tooling by tapping in dowel pins. The system is capable of handling the torque of reaming diameters up to 10 inches (25 cm) in most conditions from the transmitter housing. Also, it’s set up to use a full offering of plate bits and rock toolings like the Vermeer Gauntlet, Lance, and single roller cone bits.

The Ultra X3 housing uses a standard API rear connection and also works with quick-connect systems like the Vermeer QuickFire HD connection system. However, Jason Zylstra, product manager for Vermeer Lifecycle products, said contractors who seldomly remove their housing may find value in skipping the expense of starter rods and collars because there is a quick connect on the bit side of the housing.

“With the Ultra X3, contractors can sub out conventional quick-connect components for a transition adapter rod, increasing operational efficiency.”

Zylstra also said that using the Ultra X3 system can help reduce the size of the exit pit in some applications.

“Since the Ultra X3 doesn’t require the housing be removed for most pullbacks, HDD crews can changeover from pilot to pullback in a smaller space. Smaller pit requirements can also help reduce restoration work,”

he explained.

The Vermeer Ultra X3 is available in three different sizes covering all HDD models rated up to the 40,000-pound (177.9-kN) drill range.

• Ultra X3 375 for HDDs in the 40,000-pound (177.9-kN) drill range — Vermeer D40x55 S3 HDD or Ditch Witch JT40 HDD
• Ultra X3 325 for HDDs in the 24,000-pound (106.8-kN) drill range — Vermeer D23x30 S3 HDD, D24x40 S3 HDD, or Ditch Witch JT30 HDD
• Ultra X3 275 for HDDs in the 10,000-pound (44.5-kN) drill range — Vermeer D10x15 S3 HDD or Ditch Witch JT10 HDD

Source: Vermeer

The post Vermeer Presents the Ultra X3 appeared first on North America FarmQuip Magazine.

The Deutz Lifecycle Solutions program at a glance:

• Repair Kits: repair or a complete overhaul with customizable repair kits. (Available from stock)
• Xchange short and long blocks: replacement of the engine block with a refurbished engine block with or without cylinders. (Lead time: three working days)
• Xchange engines: replacement with a professionally refurbished engine. (Lead time: no more than 15 working days)
• Replacement engines: exchange for a brand-new engine, with or without an exhaust after-treatment (EAT) system and peripheral components, as required.
• Repower engines: retrofitting of DEUTZ engine including EAT layout, certification, and EU conformity declaration (Euro stage IIIA to IV).

“Repairing a modern diesel engine is a complex task. Maintenance and servicing have to be cost-effective for our customers, and repairs must be economically viable. With Deutz Lifecycle Solutions, our customers around the world can access the right service solution for their needs,”

says Michael Wellenzohn, member of the Deutz Board of Management responsible for sales, marketing, and service.

The engine manufacturer has been offering a special Lifetime Parts Warranty since the beginning of 2021: If customers have their engines repaired with genuine DEUTZ parts by a certified DEUTZ partner, they will receive a warranty on those repairs of five years or up to 5,000 engine operating hours. The only condition is that the engine must be registered online on the DEUTZ service portal.

Source: Deutz

The post Deutz Presents the Lifecycle Solutions Engine Solution appeared first on North America FarmQuip Magazine.