The Enduro/Enduro Pro is equipped with auto-reset Triflex tines at a release point of 700kg. The Triflex tine with a narrow design and special shape reduces the pulling forces whilst ensuring a perfect penetration in most compacted soil. It is the perfect choice for deep loosening and working on heavier soil types strewn with stones. A wide choice of bolted shares (heat-treated or carbide) and Knock-on shares are available to adapt to different working depths and tasks. Alternatively, shear bolt tines are available.

Specific angle and hollow design

“One of the main advantages of the Kverneland Triflex tine is its strength and durable material.This is due to the hollow tine technology which allows the Triflex tine to flex sideways by up to 7cm. Then there is the special shape of the tine with two working zones.The first lower zone of the tine with a reduced angle of 33° lifts and cracks the soil like a subsoiler. Due to the angle and pressure of the soil above, the tine has a high penetration. In the second part of the tine, the angle is raised to 73° in order to ensure an excellent mixing of the soil with residues,”

Guillaume Hulin, plant manager, points out.

Adjustment of soil levelling – extremely user-friendly

The Enduro/Enduro Pro can be equipped with levelling tines and levelling disc systems. All units are spring or rubber buffer loaded and adjustable in working depth and angle. In combination with special border equipment, perfect levelling is achieved.

On the Enduro Pro version, a second parallelogram at the levelling equipment ensures a consistent working angle also when the levelling depth changes. This adjustment is done on the go from the cab is extremely user-friendly for the driver.

Choice of rollers for soil consolidation – for extra flexibility

A wide range of rollers is available to meet the various conditions and requirements. Straw decomposition is accelerated. By leaving a fine levelled and weatherproof finish, slug damage is reduced and moisture preserved.

The post Kverneland Presents the Enduro for Shallow Stubble and Deeper Working Depths appeared first on North America FarmQuip Magazine.

The Enduro is a 4-row self-propelled sieving harvester on tires. The harvester is the result of several years of intensive development, which included input from agricultural contractors and potato growers. The Enduro is clearly the culmination of Dewulf’s more than 30 years of experience in the field of self-propelled harvesters for potatoes. The machine on tires is, on the one hand, equipped with new technologies in the areas of ground pressure, product cleaning and flow, and buffer capacity. On the other hand, it also contains the familiar Dewulf technology that has proven its added value time and again on many potato fields throughout the years.

Dewulf developed the Enduro with three key concepts in mind: product-friendliness, capacity, and ease of use. This is clear to see in many aspects of the machine. In terms of ground pressure, the Enduro boasts the best figures in its segment with pressure as low as 1.5 kg/cm2. This is achieved through a sophisticated system of weight distribution over three axles and by the optional tires with VF technology. Dewulf calls the ensemble of technologies that result in the harvester’s low ground pressure ‘Soil-Saver’. Because the machine’s center of gravity is located further to the rear, the Enduro also ensures that the ridges will not be damaged by the front wheels, even in wet conditions.

Just like the Kwatro, the manufacturer’s other 4-row sieving harvester, the Enduro has no
constrictions along with its sieving webs. This results in optimal sieving capacity throughout the machine. A unique feature found nowhere else in the world is the driver’s ability to easily and steplessly adjust the inclination of the cleaning module between 0° and 12°, based on the cleaning need in the field.

Moreover, the module with axial rollers can be bypassed at any inclination angle for greater flexibility. The Enduro’s ring elevator uses patented new technology. Capacity and product-friendliness were combined in this ring elevator, which was given the name ‘Fill Tastic’. The ring elevator has a high capacity of 200 tonnes/h and achieves this at a very potato-friendly speed, which is automatically regulated via a sensor. The 2-part bunker with discharge elevator, with a practical volume of 10 tonnes, is the largest in its segment.

Because the fixed bunker floor is followed by a discharge elevator with bar webs, excess soil is sieved out during unloading. The Enduro’s discharge elevator reaches over 4 full rows, so you can always easily unload into a tipper. While doing so, the tipping top ensures a product-friendly process, as the drop height of the product into the tipper is always kept to a minimum. The introduction campaign for the Enduro is the biggest in Dewulf’s 75-year history. The manufacturer would have liked to have presented the Enduro in person during Interpom, the Belgian trade fair for the potato sector, but the current pandemic compelled them to seek an alternative.

The result was a live online unveiling, which anyone interested was welcome to attend. This live event was met with a great turnout and tremendous enthusiasm. Soon available to configure in Dewulf’s virtual showroom Dewulf is now accepting orders for the Enduro via their dealer network. The manufacturer will start series production of this 4-row self-propelled sieving harvester on tires next year. Starting in late November the Enduro will also be available to configure in the virtual showroom that the manufacturer will place online for a limited time. Dewulf has said they will soon release more information about this virtual environment via their social media channels.

The post Dewulf launches the Enduro, their New 4-Row Self-Propelled Harvester appeared first on North America FarmQuip Magazine.